Two funding offers land in your inbox on the same afternoon. One quotes a factor rate of 1.25. The other quotes an APR of 39%. Which one is cheaper? Most business owners would guess the first, because 25 sounds smaller than 39. In many cases, that guess would be wrong, and it could cost thousands of dollars.
Factor rates and annual percentage rates measure cost in fundamentally different ways. Factor rates are common in alternative lending, especially for merchant cash advances and many short term working capital products. APR is the standard for bank loans, SBA loans, and most term loans and lines of credit. Learning to translate between them is one of the most valuable skills you can bring to any business lending decision.
This guide explains both measures, shows the math with real examples, and gives you a simple method to compare any two offers in plain dollars.
What a factor rate is
A factor rate is a decimal, usually between 1.10 and 1.50, that is multiplied by the amount you receive to determine the total amount you repay.
Total payback = amount funded multiplied by factor rate
If you receive $50,000 at a factor rate of 1.25, you repay $62,500. The cost of the funds is $12,500. That cost is fixed at the start, no matter how quickly or slowly you repay.
Factor rates are easy to understand at a glance, which is one reason providers use them. They tell you exactly how much you will pay back in total. What they do not tell you is how expensive that cost is on an annual basis, because they ignore time entirely.
Where you will see factor rates
Factor rates appear most often with merchant cash advances, revenue based financing, and many short term working capital loans from online providers. These products tend to be fast, flexible, and accessible to businesses with lower credit, and they often collect payments daily or weekly.
What APR is
The annual percentage rate expresses the yearly cost of borrowing as a percentage, including interest and most fees. Because it is annualized, APR lets you compare loans of different lengths on equal footing.
APR is the standard measure for term loans, lines of credit, SBA loans, equipment financing, and credit cards. A growing number of states also require commercial finance providers to disclose an estimated APR for certain products, which makes comparison easier for business owners.
Unlike a factor rate, APR accounts for the fact that you are paying down the balance over time. As your balance shrinks, interest is charged only on what remains. That makes APR a much better measure of the true cost of money.
Why a 1.25 factor rate is not 25%
The biggest misunderstanding in small business finance is treating a factor rate as if it were an annual interest rate. There are two reasons it is not.
First, the cost is charged on the full original amount for the entire term. With an amortizing loan, interest shrinks as you repay. With a factor rate, you pay the same total cost even though you are returning the principal week by week.
Second, the term is usually short. A cost of 25% spread over nine months is far more expensive on an annual basis than 25% spread over a year or more.
A worked example
Take $50,000 at a factor rate of 1.25, repaid over nine months in weekly payments.
- Total payback: $62,500
- Number of weekly payments: 39
- Weekly payment: about $1,603
- Cost of funds: $12,500
When you calculate the annualized cost of that cash flow, the equivalent APR comes out at roughly 60%. The same 1.25 factor rate repaid over six months works out to an APR near 90%. Repaid over twelve months, it falls to roughly 46%.
Now compare that with a term loan of $50,000 at 12% APR over 24 months. The monthly payment is about $2,354 and the total payback is about $56,488, for a cost of $6,488. That is roughly half the cost of the factor rate offer, even though 12 looks only somewhat smaller than 25.
The point is not that factor rate products are always bad. They are often faster, easier to qualify for, and more flexible about credit. The point is that you should know what you are paying for that speed and flexibility.
The early payoff question
With an amortizing loan, paying early usually saves money because you stop accruing interest. With a factor rate product, the cost is fixed upfront. If you receive $50,000 at 1.25 and pay it off in four months instead of nine, you may still owe the full $12,500 cost, which makes the effective APR even higher.
Some providers offer early payoff discounts that reduce the remaining cost if you settle early. Always ask whether a discount exists, how it is calculated, and whether it is written into the agreement. A verbal promise is not enough.
How fees change the picture
Fees affect both measures. With APR, most fees are already included in the quoted figure, which is one of its strengths. With a factor rate, fees are often listed separately.
Origination fees are commonly 1% to 5% and may be deducted from the funds you receive. If you are offered $50,000 at 1.25 with a 3% origination fee, you actually receive $48,500 but still repay $62,500. Your real cost becomes $14,000, not $12,500.
Other fees to ask about include underwriting fees, administrative fees, ACH or processing fees, and late payment fees. Add every one of them to your calculation.
A simple method to compare any two offers
You do not need a finance degree to compare offers. You need four numbers from each lender, in writing.
- The amount you will actually receive after fees
- The total amount you will repay
- The payment amount and frequency
- The number of payments, which tells you the term
With those, calculate two figures for each offer.
Total cost of funds equals total repayment minus the amount you actually receive. This is the dollar price of the money.
Cost per month of use equals total cost divided by the number of months in the term. This gives a rough feel for how expensive the money is over time.
Then ask the most important question: does the payment fit your cash flow in a slow month, not just an average month? A cheap offer with a payment you cannot sustain is not a good offer.
If you want an exact APR, our payment calculator can help you estimate payments for amortizing loans, and many lenders will provide an estimated APR on request.
Example comparison
Imagine three offers for roughly $40,000 in working capital.
Offer A is a merchant cash advance of $40,000 at a factor rate of 1.35, repaid over eight months through daily payments. The total payback is $54,000, so the cost is $14,000.
Offer B is a short term loan of $40,000 with a 2% origination fee and a factor rate of 1.22 over twelve months, paid weekly. You receive $39,200 and repay $48,800, a cost of $9,600.
Offer C is a line of credit with a $50,000 limit at 30% APR. You draw $40,000 and repay it over six months. The interest on a declining balance comes to roughly $3,500, plus a small draw fee.
Ranked by total cost, the line of credit is cheapest, the short term loan is in the middle, and the advance is the most expensive. But if the line of credit requires stronger credit than you have, Offer B may be the realistic best choice. The comparison gives you the facts to make that call.
When a factor rate product can still make sense
Factor rate financing has a place. It can be the right tool when speed truly matters, such as covering an emergency repair that would otherwise shut down the business. It can help businesses with lower credit scores who do not yet qualify for lower cost options. It can suit companies with strong card sales and uneven revenue, where payments tied to sales feel more manageable.
The key is to use it deliberately, for a specific short need, with a clear plan to repay. Our guide to working capital with lower credit covers how to improve your profile so lower cost options open up over time.
Questions to ask every lender
Before signing any business financing agreement, ask these questions and get the answers in writing:
- What is the total amount I will repay, including all fees?
- How much will I actually receive after fees are deducted?
- How often will payments be collected, and how much is each payment?
- Is there an estimated APR for this offer?
- Is there a discount for early payoff, and how is it calculated?
- Are there penalties for late or missed payments?
- What happens if my sales drop significantly?
A reputable lender will answer each one clearly. Every lender in our approved lender directory has passed checks for transparent pricing and written terms.
Reading a funding agreement line by line
Even with the right questions answered, the agreement itself is where the real terms live. Before you sign, read these sections carefully.
The purchase price or amount financed section shows how much you will actually receive. Compare it with the figure you were quoted and confirm any fees that have been subtracted.
The purchased amount or total repayment section shows what you will repay in total. For factor rate products, this is the amount funded multiplied by the factor rate, plus any additional fees.
The payment section describes how much is collected and how often. Look for whether payments are a fixed amount or a percentage of sales, and whether the provider can change the amount.
The reconciliation section, common in merchant cash advances, explains whether payments can be adjusted if your sales fall. A fair reconciliation clause can protect you in a slow season.
The default section lists what counts as a missed obligation and what happens next. Pay close attention to any confession of judgment language, personal guarantee terms, and the fees that apply in default.
The prepayment section explains whether paying early reduces your cost. If it says nothing, assume it does not.
If any part of the agreement does not match what you were told, ask for a corrected version before signing. A lender that refuses to put its promises in writing is a lender to avoid.
How we use cost clarity in our rankings
Cost clarity is the most heavily weighted factor in our scoring method, at 30% of every lender’s score. We reward lenders that show the total payback amount and full fee schedule before you sign, whether they quote an APR or a factor rate. You can read more about how scores are built on our about page, or see the results in our best working capital lenders rankings.
Frequently asked questions
Is a factor rate the same as an interest rate?
No. A factor rate is a fixed multiplier applied once to the amount you receive. An interest rate is charged over time on a declining balance. Because of this, a factor rate usually represents a much higher annual cost than the same number expressed as an interest rate.
How do I convert a factor rate to APR?
You need the total payback, the amount received, the payment frequency, and the term. With those, you can calculate the annualized cost of the cash flows. Many lenders will provide an estimated APR on request, and some states require it in disclosures.
What is a typical factor rate?
Factor rates commonly range from about 1.10 to 1.50. Lower rates generally go to businesses with stronger revenue, longer history, and better credit.
Does paying early reduce the cost of a factor rate product?
Not always. Because the cost is fixed upfront, paying early may not reduce what you owe unless the provider offers an early payoff discount in writing.
Which is cheaper, a merchant cash advance or a term loan?
In most cases a term loan is cheaper on an annual basis, especially for longer needs. A merchant cash advance can be faster and easier to obtain, but you usually pay more for that convenience.
The bottom line
Factor rates and APR are two languages for describing the same thing: the cost of money. Factor rates show the total cost simply but hide how expensive that cost is over time. APR shows the annual cost but can feel abstract. The most reliable approach is to translate every offer into dollars: what you receive, what you repay, how often you pay, and whether the payment fits your cash flow.
When you are ready to compare, our ranked lender list shows each lender’s score, funding speed, and typical terms side by side, free and with no credit check.